Cord sand blast rubber hose

Application: assembled in wind-pressured sand-spraying machine to get rid of the rust by spraying sand or with steel ball.

CHARACTERISTICS: The inside layer is wear-resisting and the outside layer good at anti-aging and wear-resistance.The burst pressure of the hose is four times or more higher than the working pressure.

 

Inside Diameter (mm)		Outside Diameter (mm)		Layer	Mpa (kgf/cm2)	Length
size	tolerance	size	tolerance			m	tolerance
13	±0.8	28	±0.8	4	0.63(6.3)	20	60
16	±0.8	30	±0.8	4	0.63(6.3)	20	60
19	±0.8	35	±0.8	4	0.63(6.3)	20	60
22	±0.8	37	±0.8	4	0.63(6.3)	20	60
25	±0.8	40	±0.8	4	0.63(6.3)	20	60
32	±1.2	50	±1.2	4	0.63(6.3)	20	60
38	±1.2	56	±1.2	4	0.63(6.3)	20	40
45	±1.2	63	±1.2	4	0.63(6.3)	20	40
51	±1.2	70	±1.2	4	0.63(6.3)	20	40
64	±1.5	82	±1.5	4	0.63(6.3)	10	40
76	±1.5	95	±1.5	4	0.63(6.3)	10	40

Cord sand blast rubber hose

Applications: The hose is normally for sand-blasting with air compressed machine.

Characteristics: This hose is made of high quality rubber, the insid=e layer is wear-resisting and the outsid=e layer is good at anti-aging and wear-resistance, which can stand heavy-duty and anti-aging.

Working Temperature

Performance data is based upon use between -20~70

Inside Diameter (mm)		Outside Diameter (mm)		Layer	Mpa (kgf/cm2)	Length
size	tolerance	size	tolerance			m	tolerance
25	±1.2	37	±1.2	4	0.39(3.9)	20	40
32	±1.2	44	±1.2	4	0.39(3.9)	20	40
38	±1.2	51	±1.2	4	0.39(3.9)	20	40
51	±1.2	65	±1.2	4	0.39(3.9)	20	40
64	±1.5	79	±1.5	4	0.39(3.9)	20	40
76	±1.5	91	±1.5	4	0.39(3.9)	20	40
102	±2.0	121	±1.2	4	0.39(3.9)	20	40
115	±2.0	134	±1.2	4	0.39(3.9)	10	20
127	±2.0	146	±1.2	4	0.39(3.9)	10	20
152	±2.0	175	±1.5	6	0.39(3.9)	10	20
203	±2.0	232	±1.5	8	0.39(3.9)	10	20
254	±2.0	287	±1.5	10	0.39(3.9)	10	20